From: route@monster.com
Sent: Tuesday, June 14, 2016 5:17 PM
To: hg@apeironinc.com
Subject: Please review this candidate for: IMS Integration
This resume has been forwarded to
you at the request of Monster User xapeix03
|
|||||||
|
|||||||
|
|
|
||||||
|
||||||
|
786/5/92/110/135 Syed Raza Hasan 375 Newgate Court, Schaumburg, IL 60193 Tel: 469-222-1131 Email: syedrazahasan110@yahoo.com OBJECTIVE: Seeking
a challenging engineering position in the field of telecommunications with a
focus on RF as well as integrating and testing network elements or subsystems
in 3G/4G broadband networks.
Qualifications
and Skills
Telecommunications/Networking: Engineering professional with experience spanning
Software System Test for telecommunication.
Well familiar with documentation procedures for test plans and execution.
Good understanding of GSM, CDMA, WiMax, LTE Wireless network architecture
with hands on experience provisioning, configuration and debugging
techniques. Project/People Management: In addition to managing my own projects and supervised
projects performed by direct reports, co-ops, contract personnel, and Jr.
Engineers. Communication Skills: Developed presentations and delivered the presentations to internal
groups during design review process and as a class tutor as well. Consider
business ethics and professionalism to be the
most important core values in today's competitive environment. Analytical Skills: Strong and broad technical
background and have applied concepts from various disciplines such as
probability to problems in telecommunications and wireless network system
testing. EXPERIENCE:
Sr.
LTE RF Design/Performance Engineer (Alcatel-Lucent-Sprint/AT&T)
Naperville, IL 01/01/2013- Present
·
Working on sprint 4G Top Offenders nationwide project to
improve LTE RF performance from predefined baseline, FIT and cluster testing. ·
Based on coverage issues heavily involved in 4G LTE
parameter changes, tilt implementations, PCI verifications, PCI NBR
confusion, PCI collision, X2 link status, ANR validations, eHRPD parameter
updates, MIMO and other critical changes. ·
Executed functional VOLTE test cases-IMS registration of
Modem Stack, KPI Testing, and Sanity Testing MO/MT calls. ·
Good knowledge of 3GPP, VoLTE, VoIp, LTE and UMTS. ·
Performed \ IMS Registration Testing Executed the test cases
and IOT Testing. ·
Hand on experience on latest 4G equipment and tools
including NPO, SPO, SAM B, Sprint Flux tool, WPS, Transcend, NCV, XCM, Snap
Shot and other internal ALU, Sprint tools and utilities. ·
Working closely with Sprint and ALU R&D groups for new
features and parameters recommendations and their FIT testing. ·
Using design tool for 4G LTE cell sites and make
prediction sites, run RF propagation in ATOLL & Planet EV tool for
coverage for 90IB, 80IB, 90OS ·
LTE and VOLTE optimization, KPI performance monitoring
and troubleshooting, and design of UMTS and LTE technologies. Multicarrier
strategies for LTE and UMTS Traffic load balancing between the LTE and the
UMTS networks ·
Identified and documented the best candidates for new
capacity sites by analyzing customer traffic and location information and
evaluating existing site coverage and design. Sought potential site
candidates according to prescribed criteria. ·
Converted traffic overloaded sites from three sectors to
six sectors by researching clutter and site information and analyzing
customer trends, traffic habits, and location. Designed six sector
sites in order to maintain or improve existing coverage and offload traffic. ·
Executive reporting Dashboard, Status update and Progress
reporting. ·
Experience with live data KPIs and Business Objects &
Troubleshoot for any Hardware and Backhaul related issues. ·
Presented reports to Sprint National managers
highlighting problematic areas and recommendations. Also Mange critical
changes, passing KPI’s and traffic analysis reports submission and provide
feedback for issues raised. ·
Monitoring performance & hardware issues of cells,
share day level & BH statistics, provide support on running traces,
analyze enodeB, MME, BSS, OSS or any other network element related logs or
troubleshooting requirement. LTE
Test Engineer (Motorola Solutions/Ericsson) Schaumburg, IL 01/02/2012-
12/31/2012
·
Working on setup, configuration and integration of Public
Safety LTE Demo Systems to be used in live Public Safety LTE trials in
international and domestic markets ·
Setup, configuration, troubleshooting of PTT (Push To
Talk) solution on Solaris 10 x86 platform over the Ericsson and Motorola
Solutions LTE and 3G networks. ·
Worked on VoLTE call flow SIP
detailed message decode and time offset to integrate layer 3 and SIP messages
in the browser view ·
VoLTE using SIP call flow and produce call stats and
failure analysis logs with WireShark & Windcatcher ·
Review events for VoLTE optimization analysis including
SIP Registration, Invite, Session Setup, Ack, Bye, Cancel, Subscribe, Notify,
Update, Trying etc ·
Worked closely with the national team during the
implementation and provide VoLTE Optimization to individual markets ·
Integrate PTT gateway into the Public Safety LTE system,
PTT-NMHost Server Configuration and Brocade Switch 624 FastIron 07400. ·
Installation and testing for Generic Application System
(GAS) Netra_x4270 for PTT Gateway ·
PTTPS ISO scratch installation for LTE hardware and server
configuration and gateway testing. ·
MVPN test architecture and engineering for Public Safety
LTE division of Motorola Solutions. ·
MVPN gateway and client installation, configuration, test
case creation and execution for Radio IP MVPN solutions. Work also involves
network setup between simulated agency and a lab LTE network. ·
Testing includes basic functionality test such as VPN
tunnel setup, session continuity across multiple underlying RAN types
such as LTE /3G / Wi-Fi, dynamic Quality of service (QoS) packet marking,
performance and load/stress testing. Tools/Technologies
used: VMWare ESXi, vSphere, LTE,
Radio IP MVPN Server and Client, Windows Mobile 6.5, Android, TCP/IP
Networking, iperf, Insight, WireShark Sr.
RF Engineer LTE/ CDMA (MetroPCS/Ericsson) South Florida Market 02/01/2011-
12/31/2011
·
Responsible for the CDMA/LTE capacity design in the South
Florida market through new site build and six
sector
conversion. ·
Identified and documented the best candidates for new capacity
sites by analyzing customer traffic and location information and evaluating
existing site coverage and design. Sought potential site candidates according
to prescribed criteria. ·
Converted traffic overloaded sites from three sectors to
six sectors by researching clutter and site information and analyzing
customer trends, traffic habits, and location. Designed six sector
sites in order to maintain or improve existing coverage and offload traffic. ·
Using Planet EV tool for RF LTE/CDMA cell sites design
make prediction sites, run RF propagation in Planet EV tool for 90IB, 80IB,
90OS ·
End-to-end troubleshooting throughout the LTE
networks is further enhanced by adding solution to our current deployment
scope ·
Overall coordination responsibility rests with the
Ericsson program team to ensure that the pre-launch integration activities
are not impacted by post-launch efforts. ·
Ensuring LTE functionality and uniformity of the
user experience across all markets. ·
Consistent expectations and deliverables as well as
standard reporting for all markets. ·
Integration call test review, Sector Handoff Test
(Intra) & DL/UL session to ensure accuracy and consistency, the Site
Integration call test reviewed with Ericsson engineers for correct PCI and
successful call setup for every integrated site prior to the shakedown. ·
Sector Handoff Test & DL/UL session
test validates intra-sector handoff in a clockwise and counter-clockwise
direction. FTP DL and UL sessions are performed during the clockwise and
counter-clockwise drives respectively. Over the air Data throughput is
checked to ensure that it is in-line with expected backhaul performance.
Sector azimuths are also checked. ·
Successful Site shakedowns tracked in a shared
tracker database that will be maintained and updated daily. A site will have
passed a shakedown when the Sector PCI Verified, Call setup successful,
Intra-sector handoffs successful, Azimuths verified criteria have been met ·
Work with
Ericsson in-market point of contact and with the local MetroPCS RF team.
Duties and responsibilities include radio network performance monitoring,
analysis, troubleshooting and reporting. ·
Monitor eNodeBs & troubleshoot issues (alarms,
configurations, T1 reports), system parameter changes, open/track eNodeB
related tickets and coordinate with site techs for resolution. Run scripts
for changes provided by Ericsson. ·
Troubleshoot air interface, system and network
issues to achieve the best end-user experience with Identify radio network
hardware issues, Resolve parameter integrity issues, Throughput, Latency,
Improve cell capacity and performance by maximizing SINR, Improve end user
experience. ·
During the initial phase of the LTE network tuning
activities Alarm Clearing, Parameter Consistency Checks, Network parameters
Audit, Neighbor list checked and loaded, Site Shakedowns and Configuration
updates ·
LTE Parameter settings consistency checks to ensure
that the power control, handover parameters, Session Continuity, Paging and
Custom eNodeB parameters are properly set. ·
Follow the LTE KPIs and monitored the Call Failure
Rates, Session Failure Rate, DL Application Throughput (Mean, Peak), Handover
Success Rates. RF
Engineer-III WiMax 4G, CDMA RF, Microwave, EVDO (Nortel,
Lucent, Motorola, Samsung)
Clearwire-Sprint-Nextel,
Chicago IL, Florida, Puerto Rico, TN, Buffalo, Rochester NY, Pitts PA
07/11/2005- 01/31/2011
·
Working for 4G data CW testing by using tool Gator for
transmitter & Coyote for receiver. ·
Run RF perditions in design tool Planet EV for Radial, Circular
& Stationary test. ·
Recommending CDMA/IDEN System enhancements and RF
Parameters based on simulation/propagation model ·
Network Analysis and power measurement recommendations
based on traffic and noise levels data received through sweep/spectrum analyzer ·
Microwave Radio Path Planning, designing transport
networks with point-to-point microwave, point-to-multipoint microwave for
access, backhaul design using different topologies Rings using Diversity and
Protected Paths ·
Using Path loss V4 tool for design & analyzing
Microwave links ·
Generating Drive test program using Google Pro, DeLorme ,
Street & Trips for Field survey and analysis of Microwave Paths ·
Manage and conduct field work, including path surveys,
installation and commissioning support, troubleshooting ·
Worked on Clearwire-Sprint Chicago Tribune, VA Hospital
and Life Source Lab In-Building System / DAS projects. ·
Experience with In-Building / DAS site survey and walk
testing & Analysis of existing Transmission paths, T1, DWDM for vendors
and Service providers. Also Coordinate with RF to resolve zoning issues,
Attend zoning hearings ·
Assist commissioning and field teams during site
construction and commissioning ·
Troubleshooting RF coverage issues in the market,
including RF audits of PreQual predictions, known coverage-holes ·
Effectively manage design projects and any issues that
arise to insure that they meet aggressive deployment timelines ·
Manage training & guidance for RF engineers and
Implement & support HR guidelines ·
Work closely with sales organization to plan and
prioritize ongoing market expansion post-launch ·
Deliver Sites On air notification to sales team based on
RF site coverage & areas ·
Provide ongoing capacity management, performance
management, and redesign support, in launched markets ·
Before new site construction attend sites walk to make
sure there is no any blockage or obstructions and make sure construction are
completely based on Clearvision and RF site drawings. ·
Working Planet EV for WiMax to make prediction sites, run
RF propagation Planet EV tool for 90IB, 80IB, 90OS ·
Manage sites augment project, antenna’s relocation based
on blockage and Stack Add ·
Generating detailed maps & Designs for Networks
Link Budget analysis, Interference and optimization of network ·
Verifying network coverage through cluster drives and CW
drive test data ·
In- Identify sectors with poor pilot dominance using KPI
calculation criteria (i.e. primary connections, total usage, throughput,equal
power boundary improvements) & Utilizing X-Stream & Windcatcher
to analyze test results reports ·
Perform 4G Antenna sweeps verification based on vendor
reports ·
4G ATP/SAT package testing to verify if the cell site is
meeting all necessary requirements ·
Trained new members on ATP/SAT package PM issue
resolution ·
Radial drives maps to verify Motorola SAT packages radial
routes too. Also mange team assign for radial maps ·
Calculate Pre/Post Performance and Trend Cluster
Performance ·
Support 4G NRF milestone deliverables completions,
continuous wave (CW) testing, model tuning, redesign/overlay site selection.
Supporting 4G team & sharing load task & assignments ·
Collaborate with 4G vendors to meet or exceed RF
milestones & Notify issues as they arise for resolutions. ·
Work with iDEN & CDMA teams for 4G designs to existing
overlays and new sites while minimizing network issues. ·
Testing for iDEN Mobility Manager A043 Handoff (HO) Mute,
A083 GPS E911, A043 iPTE testing ·
Support Site Development with the completion of 4G site
assessments, leasing zoning, construction complete milestones per AVF
tracking & attend weekly deployment meetings, and provide requested
deliverables as needed. ·
Monitor the Sprint Falcon reports & trouble
shoots the problem cell sites & Analyze the drop, block access failures ·
Run DO_NL tool for EVDO update the neighbors, monitor RNC
alarms & manage the dash board for EVDO ·
Enhancing CDMA voice call capability by
analyzing sync, paging, and traffic channels ·
Run Invex3G tool for EVDO & verify the RSSI, Thru
puts, handoff/downs & EVDO-1xrtt ·
Cluster testing to verify system functionality, handovers
, RNC handovers ·
Responsible for ordering & processing T-1 for New
built & capacity sites ·
New sites integration in CACP as well as EMS & RNC
servers ·
Monitor & troubleshoot EVDO & Voice health page
for Miami & Ft Myers Florida market sites ·
Collecting & Analyzing data by using tools AGILENT
E6474A / E74xx (Board & Wipper) ·
Run the flux tool for EVDO performance & monitor T-1
utilizations Engineering
Consultant
Lucent / Motorola/ Nortel (Verizon/Alltel/US Cellular)
Savannah GA, Kingman AZ, LA CA 09/2003-07/2005
·
Customer focused field-testing & system integration to
enhance system reliability ·
System integration & post-processing utilizing CAIT
& LDAT tools ·
Verifying data call functionality and progress by
analyzing Lucent CDMA network ·
Utilizing DPDM monitoring tools to verify call
origination, and RSSI parameters ·
GPRS Mobility Test to verify Data throughput between
Clusters · GSM/GPRS Software Testing and Ftp Upload/Download data Analysis · Cluster Drive to
verify RSSI, Handovers, Drop/Block call, and RF Coverage issues · RF System Optimization
by analyzing Neighbor List, Hopping, and Interference issues Project
Manager
Siemens, Toledo, OH
06/2002-08/2003
·
Worked as Project Manager responsible for
monitoring North American Customer Market ·
Development of lab integration processes and
procedures to enhance system performance ·
Continuous performance evaluation & quality
enhancement for timely product delivery ·
Project Implementation and risk assessment through
proactive technical resource management ·
Supervising engineering specialists to maximize
overall efficiency System Test Engineer
Nortel Networks, Richardson, TX01/2001-05/2002 ·
Nortel BTS Hardware & Software configuration to
optimize RF data thru put & network capacity ·
Enhancing CDMA System performance by analyzing BSC,
PDSN, and BTS communication ·
Worked on AAA server installation and software
commissioning ·
CDMA Lab Prime for Nortel Technologies responsible for
systems integration and product test ·
Voice call product test using EVRC, EVRC-B, and 13 k
vocoding ·
Enhancing CDMA System performance by analyzing BSS,
BSC, PCF, PDSN, and BTS communication ·
BSC Software Configuration and upgrade utilizing
monitoring tool (BAM Server) ·
Analyzing Call Processing and Speech / Signal flow to
optimize BSS System performance ·
Base Station Prime responsible for Load Sanity, BSC
Upgrade, and O&M · Resolved 3G
Packet Data Network issues by troubleshooting PDSN, PCU, SCIS Cards and verifying L2TP Tunnel / PPP Session configuration
(CDMA 2000 Environment) Professional
Skills
·
CCNA (Cisco Certified Network Associate) ·
Award Solutions Exploring WiMAX ·
WiMAX Network Operations & Maintenance ·
WiMAX Radio Link, Parameters & Performance ·
Mentum Planet 5 Core and WiMAX Features ·
Microwave Radio Waves Training Class ·
BSC Operations & Maintenance Certification. ·
Metro Cell Operations & Maintenance
Certification. ·
Registered Professional Engineer (PEC) ·
CDMA Technology Overview Certification. ·
Nortel Networks CDMA Product Design Certification. ·
CDMA Ground Floor Certification. ·
IPC-A_610 Soldering J-STD-001 Class 2certified by
keystone International Wireless
Tool Skills
Testing
Tools:
Atoll. Planet EV, Siterra, WindCatcher, TEMS Investigation, Grayson Invex 3G,
Agilent, Wiltech Blue Rose, CAIT, Map Info, Delorme Street Atlas, Planet EV,
Actix Analyzer, LDAT, X-Cal, X-Cap, X-Stream Software
Packages: MS-Word, Excel,
Visio and PowerPoint Education MISM (Masters
in Information Systems Management) at DeVry University BSEE
(Bachelors of Science in Electrical Engineering) at NED University of
Engineering & Technology Projects ·
Invent & Designed a Industrial Process
Controller Micro Controller Based Data Acquisition
And Control System (By having the news published in the International NEWS
bulletin) Personal
& Award
·
I am a team player who likes to enhance on skills,
communication skills, self motivated & work under pressure ·
Sprint & Xohm Excellence Award Status
& Reference
·
US Citizen and reference are available
upon request. |
|
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
|